Geomechanics.io

  • Free Tools
Sign UpLog In
Built byBoxcut Studio

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Product
    Safety

    NOSHOK PTI Series IO-Link pressure transmitters: control and safety notes for mines

    February 23, 2026|

    Reviewed by Joe Ashwell

    NOSHOK PTI Series IO-Link pressure transmitters: control and safety notes for mines

    First reported on Australian Mining

    30 Second Briefing

    NOSHOK’s PTI Series intelligent pressure transmitters introduce IO-Link communication to mining pressure monitoring, pairing digital point-to-point connectivity with high-accuracy, rugged transmitters suited to harsh plant environments. The IO-Link interface enables parameterisation, continuous diagnostics and remote reconfiguration from PLCs or distributed control systems, reducing manual intervention on slurry lines, dewatering circuits and hydraulic systems. For brownfield sites, the devices can drop into existing 2‑wire or 3‑wire pressure transmitter locations while adding structured digital data for predictive maintenance and tighter process control.

    Technical Brief

    • IO-Link integration enables cyclic process data plus acyclic diagnostic data over the same physical connection.
    • Parameter sets can be cloned and downloaded to multiple PTI transmitters directly from the PLC engineering tool.
    • Continuous device diagnostics support detection of sensor drift, overpressure events and internal faults before hard failure.
    • Remote re-ranging and damping adjustment reduce the need to open panels in hazardous or noisy plant areas.
    • Structured error codes and status bits allow alarm segregation between instrument failure and genuine process excursions.
    • Digital communication reduces analogue signal integrity issues such as ground loops and EMI on long cable runs.

    Our Take

    Within the 810 Product/Safety-tagged mining pieces in our database, relatively few focus on pressure instrumentation, which suggests NOSHOK’s PTI launch is targeting a more specialised slice of plant and mobile-equipment safety compared with the more common PPE or collision-avoidance products.

    For Australian operations, IO-Link–enabled transmitters such as NOSHOK’s are likely to integrate more cleanly with existing PLC and SCADA upgrades that many sites are rolling out under broader digitalisation programs flagged across recent Mining category coverage.

    Vendors like NOSHOK that can demonstrate improved diagnostic capability in pressure devices are well placed to align with Australian regulators’ emphasis on proactive plant condition monitoring, which has been a recurring theme in safety-oriented Mining stories in our database.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Fortescue copper–arsenic Toowong Process: project economics lens for mine planners
    Mining
    about 4 hours ago

    Fortescue copper–arsenic Toowong Process: project economics lens for mine planners

    Fortescue has sold more than 40 tonnes of copper concentrate treated with its patented Toowong Process, a low-temperature, low-pressure hydrometallurgical circuit that removes arsenic from copper concentrates. Developed and tested over four years after Fortescue acquired the technology, the process targets a longstanding penalty element constraint that limits saleability of high-arsenic ores. Commercial deployment could materially change project economics for arsenic-rich copper deposits, enabling miners to convert previously marginal or stranded resources into exportable concentrate streams.

    Core’s Finniss lithium: 92 m Blackbeard hit and what it means for mine design
    Mining
    about 4 hours ago

    Core’s Finniss lithium: 92 m Blackbeard hit and what it means for mine design

    Core Lithium has reported its longest mineralised downhole intersection at the Blackbeard prospect within the Finniss lithium operation in the Northern Territory, with diamond drillhole NMRD104 returning 92m at 1.25 per cent Li₂O, including 73m at 1.45 per cent Li₂O. The thick, continuous spodumene-bearing pegmatite materially extends known mineralisation at depth and along strike, improving the potential for larger, more coherent underground or bulk open-pit mine designs. For resource modellers and geotechs, the interval supports tighter geological domaining and may justify updated pit shells and geotechnical slope assessments.

    South32 Australian manganese output lift: throughput takeaways for mine planners
    Mining
    about 4 hours ago

    South32 Australian manganese output lift: throughput takeaways for mine planners

    South32 lifted Australia Manganese saleable output 15 per cent quarter-on-quarter to 902,000 wet metric tonnes in the September 2026 quarter, driven by higher utilisation of the primary processing circuit, while keeping full-year production guidance unchanged across its operations. Alumina production also increased, and the company is continuing capital deployment into base metals growth projects, including copper and zinc developments. For mine planners and process engineers, the numbers signal more stable plant throughput assumptions and sustained demand for processing circuit optimisation and debottlenecking work.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

    AllGeotechnicalInfrastructureHazardsEnvironmental