Geomechanics.io

  • Free Tools
Sign UpLog In
AllGeotechnicalMiningInfrastructureMaterialsHazardsEnvironmentalSoftwarePolicy

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Projects
    Failure
    Safety

    Alaska M7.0 earthquake: geotechnical risk takeaways for coastal infrastructure

    December 7, 2025|

    Reviewed by Joe Ashwell

    Alaska M7.0 earthquake: geotechnical risk takeaways for coastal infrastructure

    First reported on Geoengineer.org – News

    30 Second Briefing

    A magnitude 7.0 earthquake near Yakutat, Alaska, has generated over 160 aftershocks in 24 hours, with shaking felt across southeastern Alaska and into Yukon and British Columbia, raising concern for ageing port, pipeline and road embankment infrastructure on soft coastal sediments. USGS reports shallow crustal rupture along the Fairweather–Queen Charlotte transform system, with peak ground accelerations locally exceeding typical design levels for older structures. Geotechnical teams are prioritising rapid reconnaissance of slope stability, liquefaction-prone deltaic deposits and critical lifelines, including fuel terminals and regional airstrips.

    Technical Brief

    • Failure mechanism investigations are focusing on CPT, SPT and shear-wave velocity profiling in reclaimed shoreline zones.
    • Ongoing monitoring relies on repeat InSAR, UAV photogrammetry and temporary strong-motion arrays around key lifelines.

    Our Take

    Within our 13 Hazards stories, very few involve a magnitude 7 event in a developed jurisdiction like Alaska, which signals that existing US and Canadian seismic design codes for critical infrastructure may face an unusually stringent real-world test here.

    For mining and linear infrastructure in southeastern Alaska and neighbouring Canada, a dense aftershock sequence of over 160 events in 24 hours implies elevated risk of progressive slope degradation and tailings dam stress cycles, so operators should prioritise rapid geotechnical inspections and instrumentation checks even where initial damage appears minor.

    Given the Projects–Failure–Safety tag combination across 530 tag-matched pieces, this event is likely to prompt re‑evaluation of seismic hazard inputs in feasibility studies and operating permits for new projects in Yakutat and coastal British Columbia, especially for lifeline assets such as ports, access roads and pipelines.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Melbourne sinkhole investigations: geotechnical lessons for tunnel project teams
    Hazards
    in 4 months

    Melbourne sinkhole investigations: geotechnical lessons for tunnel project teams

    A sinkhole roughly 8–10 m wide and several metres deep has opened on the AJ Burkitt Reserve sporting oval in Heidelberg, directly adjacent to the North East Link tunnel alignment in Melbourne’s northeast. Victorian Infrastructure Delivery Authority has confirmed the “surface hole” is in the vicinity of active tunnelling operations, leading to a work pause while engineers and emergency crews carry out geotechnical investigations and monitoring. No injuries or structural damage have been reported, but the area remains fully cordoned off pending cause determination and stability assessment.

    Colombia rainfall 64% above average: slope failure lessons for engineers
    Hazards
    8 days ago

    Colombia rainfall 64% above average: slope failure lessons for engineers

    Rainfall 64% above the February average has triggered widespread flooding and landslides across Colombia, killing at least 13 people and affecting more than 10,000, with Antioquia, Cundinamarca and Valle del Cauca among the hardest-hit departments. Rivers including the Magdalena and Cauca have overtopped banks, damaging road embankments, bridge approaches and hillside settlements, and forcing evacuations in multiple municipalities. Geotechnical teams face saturated slopes, debris flows and scour at culvert and retaining-wall foundations, with authorities warning of further failures if intense rainfall persists.

    Morocco flooding from extreme rainfall and dam releases: stability lessons for engineers
    Hazards
    11 days ago

    Morocco flooding from extreme rainfall and dam releases: stability lessons for engineers

    More than 140,000 people have been evacuated from low-lying towns and rural communities in northwestern Morocco after extreme rainfall and emergency releases from multiple upstream dams caused major flooding along several river valleys. Rapid drawdown and high downstream discharges are stressing ageing embankment protections, inundating agricultural terraces and damaging road and bridge approaches, with several river crossings reportedly overtopped. Geotechnical teams now face urgent inspections of dam abutments, spillway structures and saturated slopes, alongside rapid debris clearance to reopen key access routes for relief and repair works.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.