Geomechanics.io

  • Free Tools
Sign UpLog In

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Product
    Projects

    Yanmar SV10 mini excavator: variable‑width design insights for site engineers

    April 13, 2026|

    Reviewed by Tom Sullivan

    Yanmar SV10 mini excavator: variable‑width design insights for site engineers

    First reported on The Construction Index

    30 Second Briefing

    Yanmar has launched the SV10 mini excavator in the sub‑2t class, with a variable-width undercarriage adjustable from 740mm to 990mm, allowing passage through standard doorways while providing increased stability on wider track. Powered by a 9.2kW Yanmar 3TNV70 engine, the 1,055kg machine delivers digging forces of 5.2kN on the arm and 7.6kN on the bucket, with a maximum digging depth of 1,800mm and a 540mm rear swing radius for tight urban sites. Targeting the 39% share held by sub‑2t machines in the construction machinery market, the SV10 will be exhibited at Smopyc in Zaragoza and Samoter in Verona.

    Technical Brief

    • Operating weight is 1,055kg, with a higher quoted transport weight of 1,180kg for haulage planning.
    • Rear swing radius of 540mm reduces tail-swing conflict risk against shoring, services and existing structures.
    • Yanmar 3TNV70 engine is specified at 9.2kW net, relevant for emissions and noise compliance checks.
    • Sub‑2t excavators are reported to account for 39% of the construction machinery sector by volume.
    • Machine will be presented at Smopyc (Zaragoza) and Samoter (Verona), enabling direct contractor evaluation against existing fleets.

    Our Take

    With sub‑2t machines accounting for 39% of the construction machinery sector by share, this Yanmar launch positions the brand squarely in the highest‑volume class where dealer coverage and rental fleet penetration in the UK will matter more than premium spec alone.

    The very narrow 740–990 mm configurable width and 540 mm rear swing radius signal a push into confined urban and indoor works, complementing the tracked carriers recently deployed by Gow Plant Hire for soft‑ground access rather than competing with them.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    National Grid TBM under the Thames: tunnelling design and risk notes for engineers
    Infrastructure
    in 8 months

    National Grid TBM under the Thames: tunnelling design and risk notes for engineers

    A 271.5‑tonne Herrenknecht Mixshield TBM, Caroline, has started driving a 2.2km electricity cable tunnel with a 4m internal diameter beneath the River Thames in Essex for National Grid’s Grain to Tilbury project, delivered by the Ferrovial BEMO joint venture. The drive will pass through variable Thames estuary ground conditions between 35m‑deep launch and reception shafts of 15m and 12m diameter, with tunnelling continuing into 2026 and overall scheme completion targeted for 2029. The new tunnel will replace the 1969 Thames Cable Tunnel and carry new high‑voltage circuits between Grain and Tilbury substations.

    Panama Canal Mixshield undercrossing: design and tunnelling lessons for engineers
    Infrastructure
    in 8 months

    Panama Canal Mixshield undercrossing: design and tunnelling lessons for engineers

    A 13.46m diameter Herrenknecht Mixshield TBM has broken through into the future Balboa station on Panama Metro Line 3 after completing the first-ever TBM undercrossing of the Panama Canal at depths exceeding 60m below sea level. The 5,600kW, 26,616kNm machine, fitted with an accessible cutterhead and more than 4,500 sensors linked via the Herrenknecht.Connected platform, has achieved peak advance of 150 segment rings (about 300m) per month through mixed sandstone, tuff, breccias and basalt. Around 1.5km of the 4.5km twin-track tunnel remains to final breakthrough.

    Hudson Tunnel funding deadline: schedule and risk takeaways for project teams
    Infrastructure
    in 7 months

    Hudson Tunnel funding deadline: schedule and risk takeaways for project teams

    Federal funding for New York’s US$16bn Hudson Tunnel Project has been frozen, forcing the Gateway Development Commission to suspend works from 6 February after spending over US$1bn and employing about 1,000 site workers. A Manhattan federal judge has issued a temporary restraining order, giving the administration until 5 p.m. on 12 February to restore reimbursements or appeal, while contractors warn that demobilisation, resequencing and remobilisation will add cost and delay. Sites are now in “safe-pause” mode, with dewatering, ground support and environmental monitoring maintained, and assembly of two Herrenknecht TBMs in New Jersey likely to slip beyond the planned spring 2026 launch without funding certainty.

    Related Industries & Products

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    QCDB-io

    Comprehensive quality control database for manufacturing, tunnelling, and civil construction with UCS testing, PSD analysis, and grout mix design management.

    AllGeotechnicalMiningInfrastructureMaterialsHazardsEnvironmentalSoftwarePolicy