Geomechanics.io

  • Free Tools
Sign UpLog In

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    AllGeotechnicalMiningInfrastructureMaterialsHazardsEnvironmentalSoftwarePolicy
    Safety
    Failure

    VNP Constructions HSE fines: CDM 2015 compliance lessons for site engineers

    January 15, 2026|

    Reviewed by Tom Sullivan

    VNP Constructions HSE fines: CDM 2015 compliance lessons for site engineers

    First reported on The Construction Index

    30 Second Briefing

    A London contractor converting a former public house and adjoining building into residential flats on White Lion Street, N1, has been fined after repeated failures to comply with Health & Safety Executive (HSE) prohibition and improvement notices over a 12‑month period, including unresolved work at height risks and inadequate site management competence. VNP Constructions Limited admitted breaching Regulation 15(2) of the CDM 2015 and two counts under Section 33(1)(g) of the Health and Safety at Work etc Act 1974, receiving a £7,200 fine plus £900 costs. Director Vasilis Paraskeva was personally fined £10,800 plus £900 costs under Section 37(1) for consent, connivance or neglect.

    Technical Brief

    • HSE inspectors’ initial 1 September 2022 visit identified uncontrolled work-at-height exposure and disorganised site conditions.
    • Multiple prohibition and improvement notices were served over a 12‑month period, indicating persistent unmanaged risks.
    • Failure mechanism was primarily management-level: inadequate planning, supervision and control under CDM 2015 Regulation 15(2).
    • Legal liability extended personally to director Vasilis Paraskeva via Section 37(1) where offences arose from his consent, connivance or neglect.

    Our Take

    Among the 260 safety- and failure-tagged infrastructure pieces in our coverage, very few involve prosecution for non-compliance with HSE prohibition notices, signalling that the VNP Constructions case in London sits at the more serious end of enforcement rather than routine improvement notice activity.

    The use of both Section 33(1)(g) and Section 37(1) of the Health and Safety at Work Act in this United Kingdom case underlines that directors like Vasilis Paraskeva can be pursued personally where multiple company offences are proven, which is increasingly relevant for small contractors operating inner-London sites such as White Lion Street and Kings Avenue.

    The 12‑month follow-up period between the initial September 2022 inspection and later visits reflects HSE’s pattern in our database of sustained oversight on non-compliant urban construction sites, meaning operators in London who ignore early notices should expect long-duration scrutiny rather than one-off inspections.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Panama Canal Mixshield undercrossing: design and tunnelling lessons for engineers
    Infrastructure
    in 10 months

    Panama Canal Mixshield undercrossing: design and tunnelling lessons for engineers

    A 13.46m diameter Herrenknecht Mixshield TBM has broken through into the future Balboa station on Panama Metro Line 3 after completing the first-ever TBM undercrossing of the Panama Canal at depths exceeding 60m below sea level. The 5,600kW, 26,616kNm machine, fitted with an accessible cutterhead and more than 4,500 sensors linked via the Herrenknecht.Connected platform, has achieved peak advance of 150 segment rings (about 300m) per month through mixed sandstone, tuff, breccias and basalt. Around 1.5km of the 4.5km twin-track tunnel remains to final breakthrough.

    Hudson Tunnel funding deadline: schedule and risk takeaways for project teams
    Infrastructure
    in 9 months

    Hudson Tunnel funding deadline: schedule and risk takeaways for project teams

    Federal funding for New York’s US$16bn Hudson Tunnel Project has been frozen, forcing the Gateway Development Commission to suspend works from 6 February after spending over US$1bn and employing about 1,000 site workers. A Manhattan federal judge has issued a temporary restraining order, giving the administration until 5 p.m. on 12 February to restore reimbursements or appeal, while contractors warn that demobilisation, resequencing and remobilisation will add cost and delay. Sites are now in “safe-pause” mode, with dewatering, ground support and environmental monitoring maintained, and assembly of two Herrenknecht TBMs in New Jersey likely to slip beyond the planned spring 2026 launch without funding certainty.

    Implenia/Marti JV MehrSpur Zurich–Winterthur: design and risk notes for engineers
    Infrastructure
    in 5 months

    Implenia/Marti JV MehrSpur Zurich–Winterthur: design and risk notes for engineers

    Swiss Federal Railways has awarded an Implenia/Marti 50:50 joint venture five of six MehrSpur Zurich–Winterthur lots worth just under CHF 1.7 billion, including the 8.3 km Brüttener tunnel (Lot 240) with twin 10 m diameter single-track tubes and a 1 km spur to Zurich Airport. TBM excavation will start in August 2029, with a roughly ten-year construction phase using BIM for planning and execution and extensive special foundations, earthworks and embankments. Additional works cover full redevelopment of Dietlikon station, about 6 km of new track across Dietlikon and Wallisellen sections, multiple underpasses, bridges and the Neumühle railway bridge and Storchen underpass near Winterthur.

    Related Industries & Products

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    QCDB-io

    Comprehensive quality control database for manufacturing, tunnelling, and civil construction with UCS testing, PSD analysis, and grout mix design management.