Geomechanics.io

  • Free Tools
Sign UpLog In

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    AllGeotechnicalMiningInfrastructureMaterialsHazardsEnvironmentalSoftwarePolicy
    Safety

    Lafarge Syria IS ‘partnership’: compliance and security lessons for engineers

    April 14, 2026|

    Reviewed by Tom Sullivan

    Lafarge Syria IS ‘partnership’: compliance and security lessons for engineers

    First reported on The Construction Index

    30 Second Briefing

    Former Lafarge chief executive Bruno Lafont has been sentenced by a French court to six years in prison and the company fined more than €1m for developing what the presiding judge called a “genuine commercial partnership with IS” around its £680m Jalabiya cement plant in northern Syria. Lafarge Cement Syria was found to have paid about €5.6m to Islamic State, Jabhat al-Nusra and intermediaries to keep the plant and its supply trucks operating after 2013, when militants controlled the area. The ruling links corporate payments to militant control of local natural resources, raising acute compliance and security-risk questions for construction materials firms operating in conflict zones.

    Technical Brief

    • Only expatriate staff were evacuated; Syrian employees remained exposed to checkpoints, threats and daily security risks.
    • Payments were channelled via Lafarge Cement Syria and intermediaries, rather than direct, documented contracts with armed groups.
    • Judge Isabelle Prevost-Desprez linked the financing route to militant control of local natural resources used for cement production.
    • Holcim’s 2015 acquisition occurred after the alleged conduct; the buyer states it had no knowledge of the arrangements.
    • The prosecution was initiated with support from the European Centre for Constitutional and Human Rights, framing it as a corporate accountability test case.
    • For construction materials operations in conflict zones, the ruling tightens expectations on human-rights due diligence and terrorism-financing compliance.

    Our Take

    Holcim’s later UK-focused moves in recycling and low-carbon cement, such as the 2025–26 push on environmental product declarations and secondary aggregates, suggest the group is now putting more emphasis on governance and traceability across its cement value chain than during the Lafarge Cement Syria era.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    US DOE gallium TRACE-Ga awards: process flowsheet insights for engineers
    Materials
    about 9 hours ago

    US DOE gallium TRACE-Ga awards: process flowsheet insights for engineers

    The US Department of Energy’s TRACE-Ga initiative is awarding about $5.4 million to five firms to design and validate flowsheets to restart primary gallium production, after nearly 40 years of zero domestic output and 100% import reliance under China’s 98% global supply dominance. PHNX Materials will target non-traditional waste streams to co-produce gallium, supplementary cementitious materials, alumina and ammonium sulphate, while Atlantic Alumina and Found Energy will apply counter-current ion exchange, electrochemistry and Direct Bayer Extraction to recover gallium from hot, dilute Bayer liquors. Kunin Technologies aims for a 12 tpa gallium pathway from high-Ga metal streams, and Indium Corporation will build recycling-based recovery from scrap, signalling new process options for alumina refineries and metallurgical residues.

    Murphy’s UK-first Ecocem ACT concrete pour: specification notes for designers
    Materials
    about 13 hours ago

    Murphy’s UK-first Ecocem ACT concrete pour: specification notes for designers

    Murphy has completed the UK’s first permanent works pour using Ecocem ACT low‑carbon concrete, marking a shift from traditional CEM I mixes on a live infrastructure scheme. Ecocem ACT is a clinker‑reduced binder system designed to cut embodied CO₂ significantly while maintaining CEM I‑equivalent strength and setting performance, enabling direct substitution in structural elements. For designers and contractors, this early UK deployment provides a live reference for specification, QA testing, and durability assessment of next‑generation low‑carbon binders in permanent works.

    BJD Crushers’ new technical sales engineer: implications for plant projects and capex
    Materials
    about 21 hours ago

    BJD Crushers’ new technical sales engineer: implications for plant projects and capex

    BJD Crushers has appointed former RAF and Ibstock Concrete engineer Steven Kilner as technical sales engineer to support its crusher and materials-handling product lines. Kilner brings experience supervising ground equipment maintenance at RAF Leeming and RAF Coningsby and managing machinery maintenance, site upgrades and capex projects at Ibstock Concrete. His role will centre on reviewing technical data and documentation, interpreting mechanical and materials process requirements, preparing quotations, and working with suppliers and customers to scope equipment solutions and identify growth opportunities.

    Related Industries & Products

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    QCDB-io

    Comprehensive quality control database for manufacturing, tunnelling, and civil construction with UCS testing, PSD analysis, and grout mix design management.