Geomechanics.io

  • Free Tools
Sign UpLog In
Built byBoxcut Studio

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Projects
    Research

    Geo-Hazards: Lessons from the Ground – call for papers and practice focus for engineers

    December 19, 2025|

    Reviewed by Tom Sullivan

    Geo-Hazards: Lessons from the Ground – call for papers and practice focus for engineers

    First reported on Geoengineer.org – News

    30 Second Briefing

    The International Society for Soil Mechanics and Geotechnical Engineering, via the International Journal of Geoengineering Case Histories, has opened a call for papers for a Special Issue on “Geo-Hazards: Lessons from the Ground”. Submissions are sought on documented case histories of landslides, liquefaction, sinkholes, tailings failures and other geo-hazards, emphasising in-situ data, back-analyses and performance of mitigation works. The issue targets practice-oriented lessons for design, monitoring and risk management, with detailed ground investigation records and instrumentation results strongly encouraged.

    Technical Brief

    • Call specifies fully documented geo-hazard case histories with quantified loading conditions, ground profiles and failure geometries.
    • Submissions must include original field investigation data: boreholes, in-situ tests, laboratory characterisation and monitoring records.
    • Back-analyses are expected to use explicit numerical or limit-equilibrium models calibrated against observed displacements or pore pressures.
    • Editors request detailed descriptions of mitigation works: support types, drainage measures, ground improvement methods and post-construction performance.
    • Research scope spans natural and anthropogenic geo-hazards, including tailings storage, cut slopes, embankments, tunnels and foundations.
    • Papers should document instrumentation layouts, sensor types, installation depths and monitoring durations, not only interpreted results.
    • Practical emphasis is on translating observed ground behaviour into revised design parameters, trigger thresholds and monitoring strategies.
    • Geographic and geological diversity is encouraged, but submissions remain limited to rigorously evidenced, site-specific case histories.

    Our Take

    Within the 11 Geotechnical stories in our database, ISSMGE-linked content is relatively rare, so this IJGCH special issue is likely to become a key reference point for practitioners looking for rigorously documented geo-hazard case histories rather than one-off project notes.

    Because this call sits under both ‘Projects’ and ‘Research’ tags in a pool of 790 tag-matched pieces, it signals a push to turn operational geo-hazard events into publishable case histories, which operators can later cite in design reviews and risk assessments to justify mitigation strategies.

    For consulting firms and owners active in geo-hazard-prone projects, contributing to an IJGCH special issue backed by ISSMGE can be strategically useful for demonstrating due diligence and technical leadership when negotiating with regulators and insurers on ground-risk allocations.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    Cancel at any time.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Former Australian coal mine solar and battery: geotechnical lessons for engineers
    Geotechnical
    about 6 hours ago

    Former Australian coal mine solar and battery: geotechnical lessons for engineers

    A 176MW solar farm with a 100MWh battery system is being built on a former coal mine site near Muswellbrook in New South Wales, repurposing disturbed land for large-scale renewable generation. Converting the pit and spoil areas to PV arrays and battery pads will require detailed geotechnical validation of backfilled ground, settlement behaviour and drainage, along with management of any residual mine subsidence. For civil contractors, the project offers brownfield grid connection advantages but demands careful earthworks, foundation design and contamination control.

    Low water storage levels: on-farm reservoirs and design notes for engineers
    Geotechnical
    5 days ago

    Low water storage levels: on-farm reservoirs and design notes for engineers

    Below-average water levels in England’s strategic reservoirs are prompting industry bodies to push for easier planning and permitting of on-farm reservoirs to secure irrigation supplies. Proposals focus on small to medium earth-bunded storage ponds drawing winter high flows from local rivers or boreholes, with lined embankments and controlled abstraction to protect low summer flows. For civil and geotechnical engineers, this signals rising demand for costed designs, slope stability assessments and leakage control for numerous dispersed reservoirs on agricultural land.

    Homes that can’t connect to the sewer: geotechnical design notes for engineers
    Geotechnical
    13 days ago

    Homes that can’t connect to the sewer: geotechnical design notes for engineers

    Rethinking wastewater for homes that cannot connect to the public sewer is pushing UK engineers towards on-plot and small-cluster solutions such as packaged treatment plants and advanced septic systems with tertiary filtration. Designers are weighing infiltration fields, reed beds and pumped rising mains against tighter Environment Agency discharge consents and limited garden footprints on dense housing sites. For geotechnical and civil teams, this means more site-specific percolation testing, higher loadings on shallow soakaways, and closer coordination of drainage layouts with foundations and groundwater protection zones.

    Related Industries & Products

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

    QCDB-io

    Comprehensive quality control database for manufacturing, tunnelling, and civil construction with UCS testing, PSD analysis, and grout mix design management.

    AllGeotechnicalInfrastructureHazardsEnvironmental