Geomechanics.io

  • Free Tools
Sign UpLog In
Built byBoxcut Studio

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Projects
    Product
    Safety

    Sandvik Super MDX Bolt: design and installation notes for deep seismic mines

    November 17, 2026|

    Reviewed by Joe Ashwell

    First reported on International Mining – News

    30 Second Briefing

    Sandvik is launching the Super MDX Bolt, a lighter dynamic rock bolt that delivers higher load capacity and improved anchorage for fractured and seismic ground while remaining compatible with existing MD/MDX installation rigs and procedures. A redesigned internal mechanism is intended to cut buckling risk during installation, particularly in highly fractured boreholes where conventional dynamic bolts can deform or jam. Introduced at Ground Support 2026 in Brisbane, the system targets deep, seismically active mines seeking higher energy absorption without retooling current ground support fleets.

    Technical Brief

    • Geometry and thread interfaces are kept compatible with existing Sandvik MD/MDX bolt magazines and drill rigs.
    • The internal mechanism is re-engineered to remain centralised in broken holes, limiting bending-induced stress concentrations.
    • Reduced bolt mass lowers manual handling loads and dropped-object risk around the face and rebolting bays.
    • Maintaining existing installation procedures avoids retraining gaps, a frequent root cause in ground support safety incidents.
    • Design intent targets highly fractured, poor-quality ground where conventional stiff tendons can kink or lock during insertion.
    • For similar deep operations, such retrofittable dynamic bolts offer a route to upgrade support without fleet replacement.

    Our Take

    Across recent Mining coverage, Sandvik features repeatedly in safety- and product-tagged pieces, with xCell Vision for bolt identification and new raise boring lifting tools signalling a push to systematise underground risk controls rather than sell stand-alone components.

    The combination of a new ground support bolt in Australia and Sandvik’s AI/LiDAR-based xCell Vision bolt-mapping system suggests the company is building an integrated ground support ecosystem where installation quality, monitoring and product design are tightly linked for seismically active mines.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    Cancel at any time.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Mining
    about 1 hour ago

    Wabtec Digital Mine Gen 3 CAS TRL4: deployment and integration notes for engineers

    Wabtec Digital Mine’s Generation 3 Collision Avoidance System has passed Technology Readiness Level 4 testing for surface Collision Warning and Avoidance Devices, following independent verification by VDG Solutions at Enterprises University of Pretoria. The TRL4 programme, run under the Mining Industry Occupational Safety initiative, validates hardware and software performance of CxD units in realistic mine operating scenarios. Successful TRL4 completion signals that CAS Gen 3 is technically mature enough for broader surface deployment and integration into mine mobile equipment fleets.

    Mining
    about 1 hour ago

    Cambrian College–Eaton underground BEV charger: utilisation and power notes for mines

    Cambrian College has secured C$300,000 over two years from the Canadian federal government to develop the country’s first mobile high‑power charging system for underground battery-electric mining vehicles. Working with Eaton, the team will design a rugged, skid-mounted unit that can be relocated within mine workings rather than relying on fixed charging bays. The project directly targets constraints on BEV deployment in deep and expanding mines, where flexible power distribution and rapid charging are critical for equipment utilisation and ventilation planning.

    Mining
    about 1 hour ago

    Carmeuse’s autonomous Cat 777 fleet: haul road design lessons for quarry engineers

    Carmeuse has partnered with Caterpillar to deploy one of the first autonomous Cat 777 haul truck fleets in a quarry environment at its Drummond Island limestone operation in northern Michigan, and the first of its kind on a continuous operation with a long-haul route. The project applies Cat autonomous haulage to 90 t‑class 777 trucks rather than ultra-class fleets, targeting consistent cycle times and reduced operator exposure on extended quarry hauls. For geotechnical and mine planners, the move signals growing interest in automating mid-size truck fleets on fixed, long-distance quarry haul roads.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

    AllGeotechnicalInfrastructureHazardsEnvironmental