Geomechanics.io

  • Free Tools
Sign UpLog In
Built byBoxcut Studio

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Projects

    Cambrian College–Eaton underground BEV charger: utilisation and power notes for mines

    November 17, 2026|

    Reviewed by Joe Ashwell

    First reported on International Mining – News

    30 Second Briefing

    Cambrian College has secured C$300,000 over two years from the Canadian federal government to develop the country’s first mobile high‑power charging system for underground battery-electric mining vehicles. Working with Eaton, the team will design a rugged, skid-mounted unit that can be relocated within mine workings rather than relying on fixed charging bays. The project directly targets constraints on BEV deployment in deep and expanding mines, where flexible power distribution and rapid charging are critical for equipment utilisation and ventilation planning.

    Technical Brief

    • Ruggedisation will need to address vibration, water ingress, dust, and mechanical impact from mobile plant.
    • Mobile charger relocation enables closer face charging, shortening tramming distances for low‑state‑of‑charge BEVs.
    • System design will have to manage load shedding and coordination with mine ventilation and power constraints.
    • Similar mobile high‑power units could later be adapted for tunnelling and large civil underground works.

    Our Take

    A two-year funded development window is short relative to typical underground power-system upgrade cycles, which suggests this mobile high-power charging concept is being treated as a near-term, plug-in solution that mines can trial alongside existing diesel or tethered-electric fleets rather than waiting for full fixed infrastructure builds.

    With no specific commodity tied to this project, the Sudbury-based system is likely to be transferable across hard-rock operations, giving Canadian base- and precious-metal mines a domestic option to address one of the main bottlenecks identified in other BEV deployments in our database: fast, flexible charging in constrained headings and remotes levels.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    Cancel at any time.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Mining
    about 1 hour ago

    Wabtec Digital Mine Gen 3 CAS TRL4: deployment and integration notes for engineers

    Wabtec Digital Mine’s Generation 3 Collision Avoidance System has passed Technology Readiness Level 4 testing for surface Collision Warning and Avoidance Devices, following independent verification by VDG Solutions at Enterprises University of Pretoria. The TRL4 programme, run under the Mining Industry Occupational Safety initiative, validates hardware and software performance of CxD units in realistic mine operating scenarios. Successful TRL4 completion signals that CAS Gen 3 is technically mature enough for broader surface deployment and integration into mine mobile equipment fleets.

    Mining
    about 1 hour ago

    Carmeuse’s autonomous Cat 777 fleet: haul road design lessons for quarry engineers

    Carmeuse has partnered with Caterpillar to deploy one of the first autonomous Cat 777 haul truck fleets in a quarry environment at its Drummond Island limestone operation in northern Michigan, and the first of its kind on a continuous operation with a long-haul route. The project applies Cat autonomous haulage to 90 t‑class 777 trucks rather than ultra-class fleets, targeting consistent cycle times and reduced operator exposure on extended quarry hauls. For geotechnical and mine planners, the move signals growing interest in automating mid-size truck fleets on fixed, long-distance quarry haul roads.

    Tsurumi 150kW submersible drainage pump: dewatering design notes for mine engineers
    Mining
    about 2 hours ago

    Tsurumi 150kW submersible drainage pump: dewatering design notes for mine engineers

    Tsurumi has launched the GSZ10150 submersible drainage pump, a 150kW, four-pole, three-phase 400V unit delivering up to 18,000 litres per minute with a 54.5m head, aimed at heavy-duty dewatering in civil engineering, mining, and quarrying. The pump weighs 2,650kg, stands about 2.46m high, has a 250mm discharge, and is designed to handle water with up to 15% dry solids and 25mm particles using a spiral casing, chrome cast iron impeller, and double silicon carbide mechanical seal in an oil bath. A jacket cooling system enables reliable operation when only partially submerged, with star-delta starting, VFD compatibility, integrated motor protection, and optional cable sensor for autonomous level control, while Tsurumi’s LH-W range remains the option for heads up to 216m.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Tunnelling

    Specialised solutions for tunnelling projects including grout mix design, hydrogeological analysis, and quality control.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    QCDB-io

    Comprehensive quality control database for manufacturing, tunnelling, and civil construction with UCS testing, PSD analysis, and grout mix design management.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    AllGeotechnicalInfrastructureHazardsEnvironmental