Geomechanics.io

  • Free Tools
Sign UpLog In
Built byBoxcut Studio

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Safety
    Failure

    HSE data: 25 construction deaths in 2025/26 – CDM and site risk lessons for engineers

    November 20, 2026|

    Reviewed by Tom Sullivan

    HSE data: 25 construction deaths in 2025/26 – CDM and site risk lessons for engineers

    First reported on New Civil Engineer

    30 Second Briefing

    Construction recorded 25 worker fatalities in 2025/26, the highest of any UK industry, out of 126 workplace deaths reported in provisional Health and Safety Executive (HSE) data. Although detailed causation is not yet published, the figures keep construction disproportionately represented relative to its workforce share, reinforcing the need to control known high-risk activities such as work at height, lifting operations and temporary works. Contractors and clients can expect continued HSE scrutiny on CDM compliance, site supervision quality and design-stage risk elimination.

    Technical Brief

    • Construction’s 25 deaths form a defined subset of this 126-fatality national total, enabling sector benchmarking.
    • Failure mechanisms under HSE scrutiny typically include falls from height, struck-by incidents, collapses and contact with plant.
    • Formal investigations usually combine RIDDOR reports, scene reconstruction, method statement review and interviews to establish root causes.
    • Monitoring responses often tighten permit-to-work controls, near-miss reporting, and site inspections focused on high-energy tasks.
    • Remedial actions commonly involve redesign of access/edge protection, lifting plans, temporary works sequencing and exclusion zoning.
    • HSE fatality data are routinely used to refine CDM-aligned risk registers and task-specific safe systems of work.

    Our Take

    Several related HSE cases in 2026 (e.g. the W G Carter fall fatality and Len Smith & Son roof fall) involve work-at-height and fragile-surface incidents, suggesting that a disproportionate share of the 25 construction deaths is likely tied to basic fall-prevention failures rather than rare edge cases.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    Cancel at any time.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    England flood damage up 11-fold by 2125: design lessons for flood engineers
    Hazards
    about 6 hours ago

    England flood damage up 11-fold by 2125: design lessons for flood engineers

    Flood damage costs in England could be up to 11 times higher by 2125 if current levels of investment in flood defences are not maintained, according to a new Environment Agency assessment. The analysis models long‑term climate change impacts on fluvial and coastal flooding and compares outcomes under sustained versus reduced capital and maintenance spending on embankments, barriers and drainage networks. For civil and geotechnical engineers, the findings signal sustained demand for upgraded floodwalls, raised defences and improved surface water management to keep residual risk within acceptable economic and safety thresholds.

    NCE Floods & Water Awards: 21-category snapshot for flood risk engineers
    Hazards
    1 day ago

    NCE Floods & Water Awards: 21-category snapshot for flood risk engineers

    Entries have opened for New Civil Engineer’s inaugural Floods & Water Awards, featuring 21 categories spanning project delivery, technical innovation and long-term community impact in flood and water management. Categories cover areas such as flood risk schemes, drainage and SuDS, asset resilience, digital tools and data-led decision-making, and organisational or individual contributions. The programme gives geotechnical, civil and water engineers a platform to benchmark approaches to flood defence design, catchment-scale planning and resilience upgrades against UK best practice.

    South London partial building collapse: stability lessons for urban engineers
    Hazards
    9 days ago

    South London partial building collapse: stability lessons for urban engineers

    Residents of 14 properties evacuated after the partial collapse of three terraced houses in south London have been allowed back home more than 11 weeks after the incident. Structural engineers have evidently deemed the remaining buildings stable enough for reoccupation following inspections and temporary works to secure the damaged terrace. The case underlines the time and access constraints that follow even localised collapse events, with extended exclusion zones needed while assessing party wall integrity, shared foundations and potential progressive failure in dense urban streets.

    Related Industries & Products

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    QCDB-io

    Comprehensive quality control database for manufacturing, tunnelling, and civil construction with UCS testing, PSD analysis, and grout mix design management.

    AllGeotechnicalInfrastructureHazardsEnvironmental