Geomechanics.io

  • Free Tools
Sign UpLog In
Built byBoxcut Studio

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Product
    Projects

    Tsurumi 150kW submersible drainage pump: dewatering design notes for mine engineers

    November 17, 2026|

    Reviewed by Joe Ashwell

    Tsurumi 150kW submersible drainage pump: dewatering design notes for mine engineers

    First reported on The Construction Index

    30 Second Briefing

    Tsurumi has launched the GSZ10150 submersible drainage pump, a 150kW, four-pole, three-phase 400V unit delivering up to 18,000 litres per minute with a 54.5m head, aimed at heavy-duty dewatering in civil engineering, mining, and quarrying. The pump weighs 2,650kg, stands about 2.46m high, has a 250mm discharge, and is designed to handle water with up to 15% dry solids and 25mm particles using a spiral casing, chrome cast iron impeller, and double silicon carbide mechanical seal in an oil bath. A jacket cooling system enables reliable operation when only partially submerged, with star-delta starting, VFD compatibility, integrated motor protection, and optional cable sensor for autonomous level control, while Tsurumi’s LH-W range remains the option for heads up to 216m.

    Technical Brief

    • GSZ10150 doubles the power of Tsurumi’s previous GSZ2-75-4L model, jumping from 75kW to 150kW.
    • Motor speed is held around 1,500rpm via a four-pole, three-phase 400V configuration.
    • Delivery head increase is about 43% compared with the 75kW predecessor, targeting deeper sumps and pits.
    • Spiral casing and sealed chrome cast iron impeller are configured specifically for abrasive sand–silt mixtures.
    • Jacket cooling routes pumped liquid between motor housing and outer shell, maintaining temperature under partial submergence.
    • Compatibility with star-delta starting and frequency converters simplifies integration into existing mine or quarry power systems.

    Our Take

    The 150 kW GSZ10150 sits at the high end of Tsurumi’s drainage range but still below the extreme 216 m heads cited for its LH-W high-pressure series, signalling that it is aimed at large open pits and deep excavations rather than ultra-deep shaft work.

    In our database, Tsurumi’s recent UK partnership with Dragflow on high-solids pumping suggests this new unit could be paired with heavier-duty slurry or sand-handling gear on sites where water volumes and sediment loads fluctuate between drainage and true slurry duty.

    The earlier coverage of Tsurumi trialling containerised battery storage with electric submersible pumps indicates that, although this 400 V unit is conventional, mine operators may increasingly evaluate it alongside emerging battery-backed systems for power resilience on remote dewatering lines.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    Cancel at any time.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Mining
    about 1 hour ago

    Wabtec Digital Mine Gen 3 CAS TRL4: deployment and integration notes for engineers

    Wabtec Digital Mine’s Generation 3 Collision Avoidance System has passed Technology Readiness Level 4 testing for surface Collision Warning and Avoidance Devices, following independent verification by VDG Solutions at Enterprises University of Pretoria. The TRL4 programme, run under the Mining Industry Occupational Safety initiative, validates hardware and software performance of CxD units in realistic mine operating scenarios. Successful TRL4 completion signals that CAS Gen 3 is technically mature enough for broader surface deployment and integration into mine mobile equipment fleets.

    Mining
    about 1 hour ago

    Cambrian College–Eaton underground BEV charger: utilisation and power notes for mines

    Cambrian College has secured C$300,000 over two years from the Canadian federal government to develop the country’s first mobile high‑power charging system for underground battery-electric mining vehicles. Working with Eaton, the team will design a rugged, skid-mounted unit that can be relocated within mine workings rather than relying on fixed charging bays. The project directly targets constraints on BEV deployment in deep and expanding mines, where flexible power distribution and rapid charging are critical for equipment utilisation and ventilation planning.

    Mining
    about 1 hour ago

    Carmeuse’s autonomous Cat 777 fleet: haul road design lessons for quarry engineers

    Carmeuse has partnered with Caterpillar to deploy one of the first autonomous Cat 777 haul truck fleets in a quarry environment at its Drummond Island limestone operation in northern Michigan, and the first of its kind on a continuous operation with a long-haul route. The project applies Cat autonomous haulage to 90 t‑class 777 trucks rather than ultra-class fleets, targeting consistent cycle times and reduced operator exposure on extended quarry hauls. For geotechnical and mine planners, the move signals growing interest in automating mid-size truck fleets on fixed, long-distance quarry haul roads.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

    AllGeotechnicalInfrastructureHazardsEnvironmental