Geomechanics.io

  • Free Tools
Sign UpLog In

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Product
    Sustainability
    Projects

    Steel reuse marketplace for bridge works: design and Eurocode notes for engineers

    May 1, 2026|

    Reviewed by Joe Ashwell

    Steel reuse marketplace for bridge works: design and Eurocode notes for engineers

    First reported on New Civil Engineer

    30 Second Briefing

    A new online marketplace from Expedition Engineering and Format Engineers has been launched to match surplus structural steel with bridge projects, targeting higher reuse rates in primary members such as plate girders and box sections. By cataloguing reclaimed beams with verified material certificates and dimensional data, the platform aims to let designers check section properties and Eurocode compliance before specifying reused steel. The move could cut embodied carbon in bridge decks and superstructures and push more schemes towards steel-intensive circular design.

    Technical Brief

    • Platform is operated jointly by Expedition Engineering and Format Engineers, targeting bridge-sector structural steel.
    • Marketplace focuses on primary bridge members, not temporary works or secondary architectural steel.
    • Sellers upload mill certificates and test records so designers avoid re-testing where documentation is complete.
    • Dimensional data allow rapid clash checks with existing abutments, bearings and deck build-ups.
    • Interface is intended to export section data directly into standard bridge design software workflows.
    • Tool is geared to early-stage optioneering, when span, depth and girder spacing are still flexible.
    • Wider adoption could normalise reuse clauses in employer’s requirements and DfMA-style bridge specifications.

    Our Take

    Expedition Engineering and Format Engineers also feature in our 28 April 2026 coverage of the Re-Bridge platform, signalling that these firms are positioning themselves as early technical leaders in codifying structural steel reuse for bridges rather than treating it as one-off bespoke design work.

    With Re-Bridge sitting under the Useful Simple Trust umbrella in the related article, Expedition Engineering’s role here likely gives it early access to real-world reuse datasets, which can feed back into more aggressive design assumptions on second-life steel in future tenders.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    National Grid TBM under the Thames: tunnelling design and risk notes for engineers
    Infrastructure
    in 7 months

    National Grid TBM under the Thames: tunnelling design and risk notes for engineers

    A 271.5‑tonne Herrenknecht Mixshield TBM, Caroline, has started driving a 2.2km electricity cable tunnel with a 4m internal diameter beneath the River Thames in Essex for National Grid’s Grain to Tilbury project, delivered by the Ferrovial BEMO joint venture. The drive will pass through variable Thames estuary ground conditions between 35m‑deep launch and reception shafts of 15m and 12m diameter, with tunnelling continuing into 2026 and overall scheme completion targeted for 2029. The new tunnel will replace the 1969 Thames Cable Tunnel and carry new high‑voltage circuits between Grain and Tilbury substations.

    Panama Canal Mixshield undercrossing: design and tunnelling lessons for engineers
    Infrastructure
    in 7 months

    Panama Canal Mixshield undercrossing: design and tunnelling lessons for engineers

    A 13.46m diameter Herrenknecht Mixshield TBM has broken through into the future Balboa station on Panama Metro Line 3 after completing the first-ever TBM undercrossing of the Panama Canal at depths exceeding 60m below sea level. The 5,600kW, 26,616kNm machine, fitted with an accessible cutterhead and more than 4,500 sensors linked via the Herrenknecht.Connected platform, has achieved peak advance of 150 segment rings (about 300m) per month through mixed sandstone, tuff, breccias and basalt. Around 1.5km of the 4.5km twin-track tunnel remains to final breakthrough.

    Hudson Tunnel funding deadline: schedule and risk takeaways for project teams
    Infrastructure
    in 6 months

    Hudson Tunnel funding deadline: schedule and risk takeaways for project teams

    Federal funding for New York’s US$16bn Hudson Tunnel Project has been frozen, forcing the Gateway Development Commission to suspend works from 6 February after spending over US$1bn and employing about 1,000 site workers. A Manhattan federal judge has issued a temporary restraining order, giving the administration until 5 p.m. on 12 February to restore reimbursements or appeal, while contractors warn that demobilisation, resequencing and remobilisation will add cost and delay. Sites are now in “safe-pause” mode, with dewatering, ground support and environmental monitoring maintained, and assembly of two Herrenknecht TBMs in New Jersey likely to slip beyond the planned spring 2026 launch without funding certainty.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

    AllGeotechnicalInfrastructureHazardsEnvironmental