Geomechanics.io

  • Free Tools
Sign UpLog In

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Projects
    Sustainability

    Victoria’s critical jewel: design and geotechnical takeaways for mine planners

    February 4, 2026|

    Reviewed by Tom Sullivan

    Victoria’s critical jewel: design and geotechnical takeaways for mine planners

    First reported on Australian Mining

    30 Second Briefing

    Gold built Victoria’s mining legacy, but the state is now targeting a new wave of critical minerals including rare earths, lithium and high‑purity alumina alongside its established gold sector. Exploration is intensifying in the Bendigo and Stawell zones, with juniors and majors using deeper diamond drilling and modern geophysics to chase structurally controlled deposits beneath historic workings. For geotechs and mine planners, the shift means more complex underground designs in highly altered host rocks and greater emphasis on tailings reprocessing, acid‑forming potential and multi‑commodity processing flowsheets.

    Technical Brief

    • For similar brownfield goldfields, co-existence with townships and heritage sites drives conservative geotechnical design envelopes.

    Our Take

    Victoria appears relatively under-represented in our 880 Mining stories compared with Western Australia and Queensland, so coverage of gold and critical minerals there signals growing attention on smaller but politically important jurisdictions.

    The presence of the Minerals Council of Australia in a Victoria-focused piece suggests state-level policy or permitting settings for gold and critical minerals are likely being framed as a test case for national decarbonisation and supply-chain security narratives.

    Across the 357 keyword-matched pieces on gold and critical minerals, most Australian items emphasise Western Australian and Northern Territory deposits, so a Victorian focus may indicate efforts to leverage existing goldfields infrastructure for new critical mineral opportunities with lower incremental environmental footprint.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Mining
    about 11 hours ago

    Anglo Asian–Worley Xarxar, Garadag studies: capex and layout insights for mine planners

    Anglo Asian Mining has appointed Worley Europe Limited to deliver full feasibility studies for its Xarxar and Garadag copper-gold projects in Azerbaijan, moving both assets towards potential development decisions. Worley, part of Australia-headquartered Worley Group, will apply its global open-pit and processing-plant design capability to define mine layouts, metallurgical flowsheets and infrastructure requirements. The work is expected to firm up capital and operating cost estimates and clarify options for staged development and shared infrastructure across the two deposits.

    Mining
    about 11 hours ago

    Veracio–Bureau Veritas Latin America rollout: drill-to-model gains for mine teams

    Veracio and Bureau Veritas have signed an MoU to roll out Veracio’s advanced geological scanning technologies across Chile, Peru, Argentina and Brazil, with scope to extend into other Latin American markets. The collaboration is expected to pair Veracio’s digital core scanning and downhole sensing tools with Bureau Veritas’ regional laboratory and inspection network to speed up geological data acquisition and QA/QC. For miners, this could tighten drill-to-model cycles, improve orebody characterisation and standardise high-resolution geoscientific datasets across multiple operations.

    Mining
    about 11 hours ago

    Sandvik–Diemme Filtration deal: integrated dewatering flowsheets for mine designers

    Sandvik has agreed to acquire Italy-based Diemme Filtration, adding high-performance mining filter presses and dewatering systems as a new Filtration division within its Rock Processing business area. Diemme’s portfolio includes large automated filter presses for tailings and concentrate dewatering, targeting dry-stack tailings and reduced process water consumption in large concentrators. The move gives Sandvik an in-house solution for integrating crushing, screening and filtration flowsheets, with potential implications for tailings storage design and water balance in brownfield and greenfield plants.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

    AllGeotechnicalMiningInfrastructureMaterialsHazardsEnvironmentalSoftwarePolicy