Geomechanics.io

  • Free Tools
Sign UpLog In
Built byBoxcut Studio

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Projects
    Product

    Stone Three MPC and RTO in milling: control and sensing insights for plant engineers

    November 22, 2026|

    Reviewed by Joe Ashwell

    First reported on International Mining – News

    30 Second Briefing

    Stone Three is deploying industrial AI-enabled machine vision and smart sensors in South African and global concentrators to generate real-time measurements for comminution and flotation circuits that are traditionally hard to instrument. These data streams feed model predictive control (MPC) and real-time optimisation (RTO) layers, enabling tighter control of mill load, particle size distribution and flotation performance without adding new physical instrumentation. Remote process monitoring and diagnostics from Somerset West-based specialists support sites with limited on-site process control expertise, allowing continuous tuning of control models and faster response to changing ore conditions.

    Technical Brief

    • Machine vision outputs are structured to integrate with existing DCS/SCADA and advanced control platforms.
    • Control strategies are tuned to handle variable ore hardness and feed size without manual retargeting.
    • For brownfield plants, Stone Three’s approach avoids major tie-ins by leveraging existing signals and camera locations.
    • Wider adoption of MPC/RTO in milling is being driven by limited availability of on-site control specialists.

    Our Take

    Stone Three’s South African base means its MPC/RTO milling tools are emerging from a region with deep process-control expertise in hard‑rock circuits, which often operate under power and water constraints that make advanced control particularly valuable.

    International Mining’s recent IMARC coverage has highlighted rapid deployment of AI in operations; MPC and RTO in milling are likely to be an early, practical application layer for that AI push, especially where plants are already heavily instrumented.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    Cancel at any time.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Harbour Mining Survey on Chinese vs Western tech: key takeaways for mine planners
    Mining
    about 13 hours ago

    Harbour Mining Survey on Chinese vs Western tech: key takeaways for mine planners

    A new Harbour Mining Survey of 100+ global mine operators and contractors compares confidence in Chinese versus Western mining technology and equipment, ahead of bauma CHINA 2026 in Shanghai. Respondents assess Chinese OEMs’ capabilities in battery-electric haul trucks, autonomous fleet systems and ultra-class hydraulic shovels against established Western suppliers such as Caterpillar, Komatsu and Sandvik. Findings point to faster adoption of Chinese equipment in surface coal and iron ore operations, with lingering concerns around software integration, lifecycle support and export‑market parts logistics.

    Mining
    1 day ago

    Caterpillar R2900 XE at K+S Borth: diesel-electric LHD lessons for mine engineers

    Caterpillar’s R2900 XE diesel-electric LHD has been deployed since September 2026 at K+S’s Borth rock salt mine in Rheinberg, North Rhine-Westphalia, loading and hauling ore to underground tipping points. The Borth operation, the last active mine on the Lower Rhine, produces about 2.4 Mt/y of mined salt, giving Caterpillar a high-volume industrial minerals reference site for the R2900 XE. For engineers, the trial offers data on diesel-electric performance, availability and energy use in continuous salt mining conditions.

    ElementUSA–Geophysx Jamaica MOU: residue-to-minerals pilot insights for mine planners
    Mining
    1 day ago

    ElementUSA–Geophysx Jamaica MOU: residue-to-minerals pilot insights for mine planners

    ElementUSA has signed an MOU with Geophysx Jamaica Limited to pilot processing of Jamaica’s extensive bauxite residue deposits into critical minerals and pig iron, using recovery technology proven at ElementUSA’s Critical Resource Accelerator in Cedar Park, Texas, which is backed by the US Departments of War and Energy. The pilot, to be run at new and existing Jamaican facilities, will feed into feasibility studies and the design of a commercial-scale plant, subject to financing and regulatory approvals. Geophysx will provide licensed access to residue sites and manage local stakeholder engagement, aiming to convert long‑standing red mud storage areas into a new, Jamaican‑led industrial sector.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

    AllGeotechnicalInfrastructureHazardsEnvironmental