Geomechanics.io

  • Free Tools
Sign UpLog In
Built byBoxcut Studio

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Projects
    Sustainability

    Onaping Depth electric mine milestone: design and ventilation notes for engineers

    August 28, 2026|

    Reviewed by Tom Sullivan

    Onaping Depth electric mine milestone: design and ventilation notes for engineers

    First reported on International Mining – News

    30 Second Briefing

    Glencore Canada has completed the production shaft and achieved first orebody access at the Onaping Depth Project, a deep nickel operation developed within the existing Craig Mine in Sudbury. The project is being built as a fully electric, battery-powered underground mine, eliminating diesel mobile equipment and associated ventilation load for deep-level workings. Integrated into Glencore’s Sudbury Integrated Nickel operations, Onaping Depth is intended to extend the life of Craig Mine and support high-grade nickel supply from greater depths with reduced heat and emissions management challenges.

    Technical Brief

    • Shaft completion at Onaping Depth enables full-depth hoisting, materials handling and emergency egress configuration.
    • Orebody access allows establishment of initial development headings, ground support regimes and in-situ geotechnical verification.
    • Integration within the existing Craig Mine infrastructure constrains shaft collar location, services routing and materials flow paths.
    • Event involvement of government, Indigenous, union and community stakeholders signals permitting, social licence and labour-relations alignment.
    • Deep-level access now permits refinement of stress-modelling and seismic hazard assessments using actual rock mass response.
    • Electric-only mobile fleet planning will drive ventilation-on-demand design rather than diesel dilution sizing.
    • Being part of Sudbury Integrated Nickel operations allows shared backfill plants, maintenance facilities and power distribution optimisation.
    • Similar deep electrified mining projects can benchmark Onaping Depth’s approach to brownfield integration and shaft-led access.

    Our Take

    In our database, Glencore appears both as a major producer (Sudbury Integrated Nickel) and as an active financier/offtaker in copper and battery metals deals, suggesting that a fully electric Onaping Depth could be positioned not just as a low-emission mine but as a flagship asset when negotiating future critical-mineral supply agreements.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Mining
    about 9 hours ago

    EPC Groupe–Sabodala contract: blasting capacity and slope control insights for engineers

    EPC Groupe, through EPC Mineex Sénégal, has secured a five-year explosives supply and services contract with Endeavour’s Sabodala gold mine in Senegal, valued at about €10 million per year at full run rate. The deal covers bulk explosives and blasting support for one of West Africa’s largest open-pit gold operations, signalling a step-up in local emulsion manufacturing, on-bench services and blast design capability. For mine planners and geotechnical teams, the contract points to stable high-volume blasting capacity, supporting consistent fragmentation and slope performance over the medium term.

    Mining
    about 9 hours ago

    Haultrax HX Coach in FMS: operational coaching and dispatch insights for mine teams

    Haultrax is integrating its on-site operational coaching directly into its Fleet Management System with the launch of HX Coach at IMARC 2026. The module is designed to embed real-time operator guidance and training logic into haulage fleet dispatch, moving beyond traditional FMS reporting towards in-cab behavioural feedback and decision support. For mine operators, this signals a shift from separate coaching programmes to a software-native approach that can systematically influence truck and shovel performance at scale.

    Mining
    about 9 hours ago

    IsaMill at 30: fine grinding efficiency lessons for concentrator engineers

    Glencore Technology is marking 30 years of the IsaMill fine grinding mill, first developed by Mount Isa Mines and NETZSCH to tackle complex, ultra-fine regrind duties in base metal circuits. The horizontal, high-intensity stirred mill has since been deployed in more than 130 installations globally, often replacing ball mills in the sub-20 µm range to cut specific energy consumption and increase throughput. Recent IsaMill developments focus on larger M-series units, improved ceramic media wear performance and integration with modern flotation and coarse particle recovery flowsheets.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

    AllGeotechnicalInfrastructureHazardsEnvironmental