Geomechanics.io

  • Free Tools
Sign UpLog In
Built byBoxcut Studio

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Product
    Safety

    Jefferson Tools infrared heaters: cold-weather safety notes for UK site engineers

    November 17, 2026|

    Reviewed by Joe Ashwell

    Jefferson Tools infrared heaters: cold-weather safety notes for UK site engineers

    First reported on The Construction Index

    30 Second Briefing

    Jefferson Tools has launched three new infrared heaters for UK construction sites and workshops as sub-zero temperatures and ice warnings spread, led by the Infrared 51 delivering 51,000 BTU/hr (15kW) with an approximate 350m³ heating capacity. The clean-burning Infrared 51 uses radiant heat directed at people and surfaces, and includes a built-in thermostat, LED display, tip-over protection and a stainless-steel floor deflector. Two smaller Infrared Cabinet Heaters each use twin 1,200W ruby halogen elements (2.4kW total) with thermostatic control and are offered in both 110V and 230V for standard site and domestic supplies.

    Technical Brief

    • Radiant output is directed at operatives and work surfaces, limiting convective heating of ambient air.
    • Tip‑over protection provides automatic shut‑off if the Infrared 51 is knocked or destabilised on site.
    • Stainless‑steel floor deflector is intended to shield floor finishes from localised high radiant flux.
    • Built‑in thermostat and LED display support controlled temperature set‑points and easier on‑site monitoring.
    • Thermostatic control on cabinet units is aimed at regulating energy draw and preventing overheating in small rooms.

    Our Take

    Within our 960 Infrastructure stories, very few UK pieces focus on temporary heating hardware, so Jefferson Tools’ Infrared 51 and cabinet heaters sit in a relatively niche but critical part of site safety coverage compared with more common PPE or traffic-management products.

    A 15 kW unit rated for around 350 m³ suggests these systems are sized for medium enclosed spaces such as welfare cabins or small workshops, meaning larger open-air construction areas in the UK will still need complementary frost-protection strategies (e.g. localised thawing or enclosure) rather than relying on a single heater type.

    Dual 110 V and 230 V configurations align with typical UK site power distributions, which likely reduces the need for additional transformers or temporary power redesigns and makes it easier for contractors to standardise winter kit across different projects.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    Cancel at any time.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Strabag’s Pfaffensteig Tunnel contract: design and delivery notes for rail engineers
    Infrastructure
    6 months ago

    Strabag’s Pfaffensteig Tunnel contract: design and delivery notes for rail engineers

    Strabag and Group company Züblin have secured the design-and-build structural works for the ABS Gäubahn Nord/Pfaffensteig Tunnel in south-west Germany, centred on an 11km twin-bore rail tunnel linking Stuttgart Airport station directly to the Gäubahn line towards Switzerland. About 9.8km will be driven by two TBMs, with conventional tunnelling for the A8 motorway undercrossing and airport connection, plus a 240m cut-and-cover section, retaining structures, railway underpasses and a grade-separated crossing. A 3km surface section will be upgraded and partially realigned for 200km/h operation, delivered under an integrated project delivery model with Ed. Züblin, Wayss & Freytag and Strabag AG sharing tunnelling, structural and earthworks packages.

    National Grid TBM under the Thames: tunnelling design and risk notes for engineers
    Infrastructure
    8 months ago

    National Grid TBM under the Thames: tunnelling design and risk notes for engineers

    A 271.5‑tonne Herrenknecht Mixshield TBM, Caroline, has started driving a 2.2km electricity cable tunnel with a 4m internal diameter beneath the River Thames in Essex for National Grid’s Grain to Tilbury project, delivered by the Ferrovial BEMO joint venture. The drive will pass through variable Thames estuary ground conditions between 35m‑deep launch and reception shafts of 15m and 12m diameter, with tunnelling continuing into 2026 and overall scheme completion targeted for 2029. The new tunnel will replace the 1969 Thames Cable Tunnel and carry new high‑voltage circuits between Grain and Tilbury substations.

    Panama Canal Mixshield undercrossing: design and tunnelling lessons for engineers
    Infrastructure
    9 months ago

    Panama Canal Mixshield undercrossing: design and tunnelling lessons for engineers

    A 13.46m diameter Herrenknecht Mixshield TBM has broken through into the future Balboa station on Panama Metro Line 3 after completing the first-ever TBM undercrossing of the Panama Canal at depths exceeding 60m below sea level. The 5,600kW, 26,616kNm machine, fitted with an accessible cutterhead and more than 4,500 sensors linked via the Herrenknecht.Connected platform, has achieved peak advance of 150 segment rings (about 300m) per month through mixed sandstone, tuff, breccias and basalt. Around 1.5km of the 4.5km twin-track tunnel remains to final breakthrough.

    Related Industries & Products

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    QCDB-io

    Comprehensive quality control database for manufacturing, tunnelling, and civil construction with UCS testing, PSD analysis, and grout mix design management.

    AllGeotechnicalInfrastructureHazardsEnvironmental