Geomechanics.io

  • Free Tools
Sign UpLog In
Built byBoxcut Studio

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Product
    Safety

    Donaldson SSG+ air cleaner: dust control and uptime gains for mine fleets

    April 1, 2026|

    Reviewed by Joe Ashwell

    Donaldson SSG+ air cleaner: dust control and uptime gains for mine fleets

    First reported on Australian Mining

    30 Second Briefing

    Donaldson Filtration Solutions has launched the SSG+ Donaclone air cleaner, a high‑capacity pre-cleaner and filter unit designed for heavy-duty mining engines operating in extreme dust loads. The system combines axial seal primary elements with Donaclone pre-cleaner tubes to eject a large proportion of coarse dust before it reaches the filter media, extending service intervals on haul trucks, loaders and drills. For mine maintenance teams, the unit targets reduced unplanned downtime, more stable engine performance and lower filter consumption in high‑particulate pit and haul road environments.

    Technical Brief

    • SSG+ Donaclone uses inertial separation tubes to spin out large particulates before filtration.
    • Axial seal primary elements are cartridge-style, enabling faster, tool-free change-outs in confined engine bays.
    • Housing is designed for vertical or horizontal mounting, suiting cramped engine compartments on large mobile plant.
    • Reduced dust ingress is intended to stabilise air–fuel ratios, limiting derates and exhaust temperature excursions.
    • By limiting manual filter handling frequency, exposure to respirable dust for maintenance crews is reduced.
    • Similar multi-stage dry-air cleaners are increasingly specified in mine safety management plans for critical production fleets.

    Our Take

    Recent Australian Mining coverage of XCMG’s battery-electric trucks and Kal Tire/Decoda’s haul-road hazard detection shows mobile equipment OEMs and service providers converging on health and safety performance, suggesting Donaldson’s air cleaner will likely be evaluated alongside digital and low-emission upgrades in whole-of-fleet risk programmes.

    For Australian operators grappling with supply-chain delays highlighted in the MASPRO article, a filtration product that reduces dust ingress into engines and cabins can indirectly cut unplanned downtime by extending component life and service intervals, which is increasingly being factored into total cost-of-ownership models rather than treated as a standalone safety spend.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Buffalo Potash permit at Disley: design, risk and process notes for mine engineers
    Mining
    about 5 hours ago

    Buffalo Potash permit at Disley: design, risk and process notes for mine engineers

    Buffalo Potash has secured Saskatchewan approval to complete construction and operate its Disley initial production module, a 125,000 t/y soluble-grade potash facility 50 km northwest of Regina using a patented horizontal line-drive brine circulation method through parallel horizontal wells. The C$41.5 million module will test selective underground dissolution of potassium chloride with sodium-chloride-saturated brine and supply local agriculture, drilling-fluid markets and potassium-chloride brine for regional oilfields, ahead of planned 500,000 t/y Disley East and West expansions to about 1.13 Mt/y. The permit, which runs to 30 April and excludes future modules, requires groundwater characterisation, air-quality compliance and financial assurance, while the project proceeds without a feasibility study or declared reserves, elevating technical and economic risk.

    Exiro-led takeover of Vale’s Manitoba nickel complex: key points for mine planners
    Mining
    about 5 hours ago

    Exiro-led takeover of Vale’s Manitoba nickel complex: key points for mine planners

    Exiro Minerals, Orion Resource Partners and Canada Growth Fund have acquired an 81.1% stake in Vale’s Thompson nickel operations in northern Manitoba, committing up to US$200 million to sustain and develop the six-decade-old complex. The new vehicle, Exiro Nickel, takes over day-to-day control of two operating underground mines, the adjacent concentrator and exploration ground along the 135 km Thompson Nickel Belt, while Vale Base Metals retains an 18.9% interest. A multi-year offtake agreement keeps Vale buying nickel concentrate from the Thompson mill, providing a defined outlet for future production.

    Mining
    about 5 hours ago

    Moeve–Emerita 100% renewable diesel deal in Spain: decarbonisation notes for mines

    Moeve and Emerita Resources have signed Spain’s first mining-sector agreement to deploy 100% renewable diesel (HVO) at industrial scale, designating Moeve as preferred supplier of this second-generation biofuel. The HVO, derived from waste and residue feedstocks rather than food crops, is claimed to cut lifecycle CO2 emissions by up to 90% compared with conventional diesel. For mine operators, the drop-in fuel compatibility with existing diesel engines offers a near-term route to decarbonise haul trucks and auxiliary fleets without major equipment changes.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

    AllGeotechnicalInfrastructureHazardsEnvironmental