Geomechanics.io

  • Free Tools
Sign UpLog In

    Geomechanics.io

    Geomechanics, Streamlined.

    © 2026 Geomechanics.io. All rights reserved.

    Geomechanics.io

    CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

    Industries

    MiningConstructionTunnelling

    Company

    Terms of UsePrivacy PolicyLinkedIn
    Projects

    Youanmi underground dewatering: geotechnical mapping and design notes for engineers

    May 7, 2026|

    Reviewed by Tom Sullivan

    Youanmi underground dewatering: geotechnical mapping and design notes for engineers

    First reported on Australian Mining

    30 Second Briefing

    Dewatering of the main pit at Rox Resources’ Youanmi gold project in Western Australia has been completed, exposing the historic Youanmi underground workings for the first time in decades and clearing the way for decline access. The work allows detailed geotechnical mapping of existing drives and stopes, assessment of ground conditions around legacy voids, and planning of new underground infrastructure tied to the existing shaft and portal locations. Engineers will now be able to refine support regimes, groundwater management and backfill strategies based on direct inspection rather than historic records.

    Technical Brief

    • Dewatering targeted the main open pit immediately above the historic Youanmi underground mine infrastructure.

    Our Take

    In our database of Mining–Projects coverage, Youanmi is one of the few Western Australian gold assets with both a recent final investment decision and a fully secured multi-hundred-million-dollar funding package, which typically signals strong lender confidence in the underground mine design and dewatering strategy.

    The earlier report on high-grade intercepts outside the current Youanmi definitive feasibility study mine plan suggests that dewatering the main pit could also unlock flexibility to re-optimise underground access and scheduling around those emerging zones.

    Rox Resources’ selection of MACA Interquip Mintrex as preferred EPC contractor for the Youanmi processing plant indicates that, as dewatering progresses, there is already alignment between underground development timing and surface plant delivery, reducing interface risk that has delayed other Australian gold projects in our coverage.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Mining
    about 2 hours ago

    Weir’s WARMAN MCR² mill circuit pump: reliability and wear-control notes for plant engineers

    Weir has introduced the WARMAN MCR² mill circuit pump as an evolution of its existing WARMAN mill circuit range, targeting mineral processing plants facing more complex ores, higher throughput and harsher slurry conditions. The MCR² is engineered to give operators tighter control over wear behaviour, maintenance intervals and overall asset condition in high-duty grinding circuits. For plant engineers, the new design signals further options to stabilise mill discharge pumping performance as ore hardness and variability increase.

    Tivan’s Walshy’s Wall drilling: subsurface targets and RC plan for mine planners
    Mining
    about 3 hours ago

    Tivan’s Walshy’s Wall drilling: subsurface targets and RC plan for mine planners

    Tivan has secured final regulatory and heritage approvals to start maiden drilling at the Walshy’s Wall target within the Sandover Fluorite Project in the Northern Territory, with a staged programme of 31 reverse circulation holes scheduled from October. Walshy’s Wall, a manganese–barite gossan discovered by Tivan geologists in October 2025, will be tested for subsurface continuity and grade using RC to penetrate the weathered profile efficiently. Early results will guide follow-up step-out drilling and resource definition across the broader fluorite–manganese system.

    Bellevue Gold board refresh: governance and project finance lens for mine teams
    Mining
    about 3 hours ago

    Bellevue Gold board refresh: governance and project finance lens for mine teams

    Bellevue Gold is adding two independent non-executive directors, Debra Counsell and Tanya Rybarczyk, to its board from 23 September 2026 as part of a planned succession process for the Western Australian gold producer. Both bring more than 30 years’ experience spanning mining, resources, finance and infrastructure, signalling a stronger governance and capital markets focus as Bellevue ramps up its namesake underground operation. The appointments point to closer board scrutiny of project financing, risk management and long-term growth options in a volatile gold price environment.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

    AllGeotechnicalInfrastructureHazardsEnvironmental