Geomechanics.io

  • Free Tools
Sign UpLog In
Built byBoxcut Studio

Geomechanics.io

Geomechanics, Streamlined.

© 2026 Geomechanics.io. All rights reserved.

Geomechanics.io

CMRR-ioGEODB-ioHYDROGEO-ioQCDB-ioFree Tools & CalculatorsBlogLatest Industry News

Industries

MiningConstructionTunnelling

Company

Terms of UsePrivacy PolicyLinkedIn
    Projects

    Kingfisher’s Copper Blow drilling: resource, geotech and planning notes for engineers

    November 4, 2026|

    Reviewed by Tom Sullivan

    Kingfisher’s Copper Blow drilling: resource, geotech and planning notes for engineers

    First reported on Australian Mining

    30 Second Briefing

    Kingfisher Mining has started a 3500m drilling campaign at its Copper Blow copper–gold project near Broken Hill, New South Wales, using a mix of reverse circulation and diamond holes to test extensions to existing mineralisation. Drilling is focused on defining the scale and continuity of the mineralised system to support a maiden mineral resource estimate, with step-out holes planned along strike and at depth from known intercepts. For geotechnical and mine planning teams, the diamond core will be critical for structural logging, rock mass characterisation and metallurgical sampling.

    Technical Brief

    • Campaign is located at Copper Blow, a copper–gold system south of Broken Hill, NSW.
    • Kingfisher Mining is operator, integrating both RC and diamond rigs under a single 3500m programme.

    Our Take

    Kingfisher Mining’s Copper Blow drilling near Broken Hill sits alongside a recent cooperation agreement in our coverage where Kingfisher and Broken Hill Mines Limited plan to route high‑grade copper from Kingfisher’s assets into Broken Hill’s existing processing capacity, signalling a likely pathway to monetise any new intercepts without greenfield plant capex.

    Within our 1243 Mining stories, copper projects in New South Wales are relatively under‑represented compared with Western Australian copper coverage, so a 3500 m campaign at Copper Blow marks Broken Hill as one of the few NSW copper‑gold exploration hubs drawing sustained attention.

    For operators around Broken Hill, the combination of a copper‑gold target and access to established processing infrastructure typically improves project optionality, allowing juniors like Kingfisher Mining to pivot between toll treatment, JV structures, or staged development depending on drilling outcomes and market conditions.

    Geotechnical Software for Modern Teams

    Centralise site data, logs, and lab results with GEODB-io, CMRR-io, and HYDROGEO-io.

    No credit card required.

    • Save and export unlimited calculations
    • Advanced data visualisation
    • Generate professional PDF reports
    • Cloud storage for all your projects

    Prepared by collating external sources, AI-assisted tools, and Geomechanics.io’s proprietary mining database, then reviewed for technical accuracy & edited by our geotechnical team.

    Related Articles

    Mining
    about 2 hours ago

    2027 PDAC Awards: key project and sustainability lessons for mining teams

    PDAC has named six recipients of the 2027 PDAC Awards, recognising achievements spanning early-stage discovery, major mine development and sustainability in Canadian and international projects. The awards cover categories such as mineral exploration, mine builders, sustainability and indigenous engagement, with winners typically selected for discoveries that add multi-million-ounce gold or multi-million-tonne base metal resources and for projects that reach commercial production on time and budget. For engineers and geoscientists, the list signals which exploration models, development strategies and community partnership approaches are currently being held up as best practice.

    Mining
    about 2 hours ago

    Putzmeister Underground–Cannon Mining Mexico deal: fleet support gains for mine engineers

    Putzmeister Underground Division has appointed Cannon Mining Latin America as its exclusive distributor for Mexico, covering shotcrete equipment, concrete transporters and other specialist underground mining solutions. The deal aims to expand parts and service coverage across key mining regions such as Sonora and Zacatecas through Cannon’s local workshops and field service teams. For mine operators, the partnership should shorten lead times for fleet support and commissioning of new underground concrete placement systems, reducing reliance on imports and remote technical support.

    Mining
    about 2 hours ago

    Epiroc Autonomous SmartROC D65 MKII drills: deployment lessons for mine engineers

    Epiroc’s fleet of Autonomous SmartROC D65 MKII blasthole drills is expanding across mining and quarrying, with units now running at Fortescue’s Solomon and Eliwana iron ore operations in Australia and at Luck Stone’s Rockville quarry in the United States. The rigs automate drilling cycles for production blastholes, delivering repeatable hole depth and spacing and reducing operator exposure at the bench. For engineers, the deployment signals growing acceptance of OEM autonomy for large-scale production drilling rather than limited trial use.

    Related Industries & Products

    Mining

    Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.

    Construction

    Quality control software for construction companies with material testing, batch tracking, and compliance management.

    CMRR-io

    Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.

    HYDROGEO-io

    Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.

    GEODB-io

    Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

    AllGeotechnicalInfrastructureHazardsEnvironmental