Rio Tinto cuts alumina output at Yarwun: tailings and life‑of‑asset lens for engineers
Written by Joe Ashwell

First reported on MINING.com(Rio Tinto cuts alumina output in Australia)
30 Second Briefing
Rio Tinto will cut output at its Yarwun alumina refinery in Gladstone by 40% from October 2026, removing about 1.2 million tonnes per year from the market to extend the plant’s life to 2035 amid alumina prices around $340 per tonne, less than half last year’s $800 spike. The move is driven by tailings-storage constraints, with the existing facility projected to hit capacity by 2031 and a second storage area deemed uneconomic in current conditions. About 180 of 725 jobs will be affected as Rio trials adjusted deposition patterns, higher compaction and drying efficiencies, and enhanced residue stacking to safely increase containment capacity.
Technical Brief
- Tailings-storage capacity at Yarwun is forecast to be exhausted by 2031 at current throughput, so the 40% cut from October 2026 is being used as a risk-control measure to keep deposition volumes within the existing engineered footprint.
- Rio Tinto is using the window to 2035 to trial modified deposition patterns, effectively re-optimising beach slopes and discharge locations to improve consolidation and freeboard without breaching design factors of safety.
- Higher compaction and drying efficiencies are being targeted to increase dry density of bauxite residue, which directly reduces volumetric demand per tonne of alumina and lowers the risk of pore-pressure build-up and instability in the tailings stack.
- Enhanced residue stacking technologies and alternative waste-handling configurations are under evaluation to safely increase containment capacity, implying potential moves towards higher, steeper, or more trafficable stacks subject to geotechnical stability checks and regulatory approval.
- The trials are framed to validate “technically and environmentally acceptable” pathways, indicating that any revised stacking or deposition strategy will need to satisfy both geotechnical performance criteria (stability, settlement, seepage) and environmental constraints (runoff quality, dust, footprint).
- About 180 of 725 roles are expected to be affected during the transition, so maintaining operational safety culture and adequate staffing for monitoring, inspection and emergency response around the tailings facility will be a key implementation risk.
- Bauxite mines and aluminium smelters feeding and offtaking from Yarwun will continue at full capacity, so any tailings-management solution must cope with the changed refinery operating profile without creating upstream or downstream safety or logistics bottlenecks.
Our Take
A 1% cut to global alumina supply by Rio Tinto at Yarwun is small in market-share terms but, given last year’s spike to around $800/t, even marginal disruptions have recently been enough to trigger sharp price volatility in the Atlantic-indexed trade.
Tailings capacity constraints at Yarwun by 2031 signal that other mature alumina refineries in Queensland and wider Australia may face similar storage and permitting bottlenecks, which could tighten bauxite-to-alumina conversion capacity even if bauxite mining itself remains steady.
With only a handful of alumina- and aluminium-tagged pieces in our recent mining coverage, this move by Rio Tinto stands out as one of the more material structural supply adjustments in the sector, rather than just a short-term curtailment tied to power prices or demand cycles.
Related Articles
Related Industries & Products
Mining
Geotechnical software solutions for mining operations including CMRR analysis, hydrogeological testing, and data management.
CMRR-io
Streamline coal mine roof stability assessments with our cloud-based CMRR software featuring automated calculations, multi-scenario analysis, and collaborative workflows.
HYDROGEO-io
Comprehensive hydrogeological testing platform for managing, analysing, and reporting on packer tests, lugeon values, and hydraulic conductivity assessments.
GEODB-io
Centralised geotechnical data management solution for storing, accessing, and analysing all your site investigation and material testing data.

